This post will cover some use cases of the ESP-32 Cam module in low or no light conditions. The software and hardware of the ESP-32 Cam module will modified for this purpose. Some additional hardware examples will be introduced as well. Lastly, the use of FFMpeg will be demonstrated to further enhance the images gathered from the ESP-32 cam module. What are some reasons for the ESP-32 Cam module to be used in low or no light environments? The more…
The purpose of this post is to demonstrate how to use Processing to present data in a visual way. The methods used in this post will be based on the work done by M.Furkan Bahat. Source – https://mfurkanbahat.blogspot.com/2014/11/artificial-horizon-and-compass-using.html The hardware used in this demonstration will be the following: GY-521 MPU6050 Arduino Uno ESP32-Cam ESP32-USB-Module Patch wiring USB cables Windows 10 laptop The MPU6050 is connected to the Arduino Uno using the following pin connections, as shown in the images below….
The stock Volantex Ranger 600 TX is as basic as any TX can get. The undocumented throw reversals prompted a closer look at the controller. The terms controller and TX apply to the hand held radio controller used to operate the remote controlled plane, TX will be used going forward. One item that was replaced with a yellow LED was the beep indicator. Since a lot of bench testing was going to take place, the blinking LED would be less…